‌ Wire drawing machine in the use process may encounter a variety of faults, the following are some common faults and treatment methods:

‌ wire discoloration ‌ :

‌ reason ‌ : oxidation discoloration, possibly due to low emulsion concentration, abnormal temperature, wire attached too much oil, etc.

‌ treatment ‌ : Adjust the emulsion concentration to normal, control the temperature at 35℃~45℃, check and remove excess oil ‌.

‌ mold wear ‌ :

‌ Cause ‌ : caused by the stress state during wire drawing.

‌ treatment ‌ : check the mold wear situation regularly, replace the mold with serious wear in time, adjust the drawing parameters to reduce wear ‌.

‌ broken wire ‌ :

‌ cause ‌ : The drawing die is faulty or the mold ratio is incorrect.

‌ treatment ‌ : check whether the drawing die is damaged or worn, and replace it in time; Adjust the mold ratio to ensure a smooth drawing process ‌.

In addition, regular maintenance of the wire drawing machine is also an important measure to prevent failure, including checking fasteners, lubrication 

parts, electrical systems, etc. ‌.